NXP Semiconductors FRDM-MCXN947 - Page 5

NXP Semiconductors
UM12018
FRDM-MCXN947 Board User Manual
Figure 3 shows the top-side view of the FRDM-MCXN947 board, with connectors, push buttons, and LEDs
highlighted.
J17
MCU-Link5 USB
J16
MCX 10/100
Ethernet
connector
J11
MCX HS USB
J8
FlexIO / LCD
connector
J9
Camera connector
J7
PMOD connector
J1
Arduino
compatible
header (outer row) /
FRDM header (inner
row)
J2
Arduino
compatible
header (outer row) /
FRDM header (inner
row)
J4
Arduino
compatible
header (outer row) /
FRDM header (inner
row)
J3
Arduino
compatible
header (outer row) /
FRDM header (inner
row)
J5
mikroBUS header
J6
mikroBUS header
J23
MCX SWD
SW1
Reset
D1
MCX RST
LED
SW2
Wakeup
SW3
ISP
J10
CAN
header
D5 LED
D2
RGB LED
Figure 3. FRDM-MCXN947 connectors, push buttons, and LEDs (top-side view)
Figure 4 shows the jumpers on the FRDM-MCXN947 board.
UM12018 All information provided in this document is subject to legal disclaimers. © 2024 NXP B.V. All rights reserved.
User manual Rev. 1 — 20 January 2024
5 / 41