Need help?Do you have a question about the Oakton EC1 and is the answer not in the manual?
Describes short and long press functions for turning on/off, setup, and parameter changes.
Details keypad use for entering calibration, confirming, and selecting parameters.
Details steps for taking conductivity readings after calibration.
Recommendation for first-time use or long periods of inactivity.
Details on accepted calibration solutions and unit conversion.
Explains error codes (Er1, Er2) and their troubleshooting.
Notes on pre-calibration and testing accuracy with calibration solutions.
Step-by-step guide for entering setup and changing parameters.
Explains conductivity range selection and factory default restoration.
Covers calibration point display, stability indication, self-diagnosis, and low battery alerts.
Details the two-year warranty and exclusions for the instrument.
Describes short and long press functions for turning on/off, setup, and parameter changes.
Details keypad use for entering calibration, confirming, and selecting parameters.
Details steps for taking conductivity readings after calibration.
Recommendation for first-time use or long periods of inactivity.
Details on accepted calibration solutions and unit conversion.
Explains error codes (Er1, Er2) and their troubleshooting.
Notes on pre-calibration and testing accuracy with calibration solutions.
Step-by-step guide for entering setup and changing parameters.
Explains conductivity range selection and factory default restoration.
Covers calibration point display, stability indication, self-diagnosis, and low battery alerts.
Details the two-year warranty and exclusions for the instrument.
General| Accuracy | ±1% full scale |
|---|---|
| Temperature Accuracy | ±0.5 °C |
| Display | LCD |
| Power Supply | 9V battery |
| Measurement Range | 0 to 1999 µS/cm |
| Resolution | 1 µS/cm |
| Temperature Compensation | Automatic |
| Temperature Range | 0 to 50 °C |
To Next Page
