Oakton Temp-100 - Maintenance; Cleaning; Batteries

- 25 -
21. MAINTENANCE
Properly us ed, the th ermome ter should
maintain calibr ation in defi n itel y and not
require service other tha n occasional
cleaning
of the housing and changing
of
the batteries.
22. CLEANING
WARNING:
TO PREVENT IGNITION OF A
HAZARDOUS AT M OSPHERE BY
E
L E C TROSTATI C DISCHARGE,
CLEAN WITH DAMP CLOTH.
Do not clean wi th abrasives or solven ts.
Use mild deter ge nts, never immerse nor
use excessive fluid.
23. BATTERIES
If there is no display when the
thermometer is turned on, check condition
of the three AA batteries. Also check that
the battery terminals are clean and
batteries are properly installed. If
replacement is necessary, refer to the
BATTERY INSTALLATION AND
REPLACEMENT section for replacement
procedure.