Need help?Do you have a question about the Oase ProfiClear Premium Compact and is the answer not in the manual?
General| UV-C Clarifier | No |
|---|---|
| Pump Included | No |
| Filter Media | Filter Foams, Filter brushes |
| Inlet Connections | 1.5" |
| Filter foam, ppi | 10 |
| Hose Connection | 1.5" |
Explains document structure and symbol meanings.
Details system setup and advantages for pump fed configurations.
Details system setup and advantages for gravity fed configurations.
Covers risks associated with water and electrical components.
Details risks for individuals with pacemakers due to magnets.
Ensures correct and safe electrical hookups according to regulations.
Provides guidelines for safe unit operation and handling.
Covers planning considerations for unit placement and site preparation.
Details specific requirements for pump fed system setup.
Details specific requirements for gravity fed system setup.
Provides guidance on selecting and using pipes for connections.
Details how to connect the water inlet for different system types.
Explains how to fit the UVC clarifier to the drum filter module.
Details connecting the DN 110 coarse dirt outlet.
Explains how to connect the DN 75 dirt outlet for drainage.
Guides installation of the control system for pump and gravity fed setups.
Details connecting an external aerator pump to the system.
Outlines the sequence for starting the filter system for the first time.
Specific steps for commissioning the gravity fed filter system.
Details the control panel layout, display, and buttons.
Explains how to power the filter system on and off.
Details how to initiate and perform manual cleaning cycles.
Guides setting the duration for automatic cleaning cycles.
Explains setting extra cleaning cycle duration for heavy deposits.
Guides setting the interval for time-based cleaning cycles.
How to view the number of cleaning cycles performed (24hr/total).
Instructions for restoring factory default settings for cleaning parameters.
Lists system error codes, possible causes, and remedies.
Covers motor block, overheating, and other system error codes.
Details common problems and their solutions for unit operation.
Addresses issues related to water clarity, nutrients, and biomedia.
Details how to clean the main unit components and housing.
Covers regular checks, removing dirt, and system cleaning.
Guides cleaning of the rinsing mechanism and nozzles.
Details screen element cleaning and descaling procedures.
Explains how to remove and refit the filter drum for maintenance.
Guides rinsing pump cleaning, replacement, and related tasks.
Instructions for replacing the aerator rod.
Guides safe storage and winter protection of the unit.
Lists components subject to wear and recommended replacement.
Provides information on proper product disposal methods.
To Next Page