Need help?Do you have a question about the Oase Varionaut 270 DMX/02 and is the answer not in the manual?
General| Model | Varionaut 270 DMX/02 |
|---|---|
| Category | Swimming Pool Pump |
| Manufacturer | Oase |
| Max. flow rate | 270 l/min |
| Cable length | 10 m |
| Protection class | IP68 |
| Frequency | 50/60 Hz |
| Hose connection | 2" |
| Control | DMX |
Specifies the intended applications for the pump, such as pond filters and fountains.
Covers user supervision, child safety, and general precautions for safe operation.
Details electrical installation requirements and safe operating practices to prevent hazards.
Guides on submerged installation in ponds and dry installation requirements.
Instructions for connecting suction and pressure lines during installation.
Step-by-step guide to rotating the pump casing for different outlet positions.
Instructions for connecting the DMX cable and configuring the unit's address.
Covers initial startup procedures, commissioning, and switching the unit on/off.
Details the two DMX channels used for pump control, including pump OFF and speed settings.
Information on switch-on/switch-off cycles and sequence programming for effects.
Lists general and sensor parameters accessible via RDM for unit status and configuration.
Details specific parameters like runtime, status messages, and configuration modes for advanced control.
Provides common causes and remedies for pump malfunctions such as failure to start or deliver.
Instructions on how to clean the pump using recommended agents and rinsing.
Step-by-step instructions for replacing the pump's impeller unit.
Guidance on proper cleaning, protection, and storage of the unit for winter conditions.
Details the 24-month manufacturer's guarantee conditions and claim procedures.
Explains the meaning of unit markings, including IP protection, sun radiation, and disposal icons.
To Next Page
