14
3) View DTCs and their definitions on screen.
•
The control module number, sequence of the DTCs, total
number of codes detected and type of codes (Generic or
Manufacturer specific, Stored or Pending codes) will be
observed on the upper right hand comer of the display.
4) If more than one DTC is found, use UP/DOWN button, as
necessary, until all the codes have been shown up.
•
If no codes are detected, a “No codes are stored in the
module!”message displays on the screen.
•
If retrieved DTCs contain any manufacturer specific or
enhanced codes, the display indicates “Manufacturer
control”.
5) Press EXIT button to return to previous menu.
•
If there is a Stored trouble code, the red LED will light up.
•
If there is a Pending trouble code, the yellow LED will
light up.
To Next Page
Loading...
