20
4) If the vehicle supports readiness test of “This Drive Cycle”，
a screen of the following will be displayed:
The number “x/x” to the upper right comer of the screen indicates
total number of screens the retrieved data cover and sequence of
currently displayed data.
5) Press EXIT button to return to previous menu.
3.5 Viewing Vehicle Information
The Vehicle Info. function enables retrieval of the Vehicle
Identification No. (VIN), Calibration ID(s), Calibration
Verification Nos. (CVNs) and In-use Performance Tracking
on 2000 and newer vehicles that support Mode 9.
1) Use UP/DOWN button to select Vehicle Info, from
Diagnostic Menu and press OK button.
To Next Page
Loading...
