24
3) In the realtime curve screen, Use UP/DOWN button to
change the update speed of the curve.
4) Press EXIT button to return to the previous menu.
3.8 O2 Sensor Test
The O2S Monitor Test function allows retrieval and viewing of
O2 sensor monitor test results for the most recently performed
tests from the vehicle’s on-board computer.
1) Use UP/DOWN button to select O2 Sensor Test from
Diagnostic Menu and press OK button.
2) Wait until the scan tool validates the PID MAP.
3) Use UP/DOWN button to select O2 sensor from O2S
Monitor Test menu and press OK button.
To Next Page
Loading...
