16
3) If you want to proceed with erasing the codes, press OK
button to erase.
•
If the codes are cleared successfully, an “Erase
Done!”message shows up.
•
If the codes are not cleared, then an “Erase Failure.
Turn Key on with Engine off!”message displays.
4) Wait a few seconds or press any key to return to Diagnostic
Menu.
•
If you don’t want to erase the codes, then press
UP/DOWN button to select NO and press OK button. A
“Command Canceled” message shows up. Press any key
or wait a few seconds to return to Diagnostic Menu.
3.3 Viewing Freeze Frame Data
1) To view freeze frame, use UP/DOWN button to select
View Freeze Frame from Diagnostic Menu and press OK
button.
2) Wait a few seconds while the Car Professional Scan Tool
validates the PID MAP.
To Next Page
Loading...
