6.3 Fault code query
6.4 I/M ready state
6
After connecting the vehicle, go to the home page, select the "DTC
Lib" menu, press the OK button to enter the fault code query page,
support the query of the vehicle fault code, and explain the reason.
After connecting the vehicle, enter the home page, select the "I/M"
menu, and press the OK button to enter the setting page. This menu
has 2 functions, and you can use the up/down function keys to turn
pages.
I/M Readiness
Since DTCs Cleared
This Drive Cycle
1/2
DTC Lookup
P2100
The 1st range:P,C,B,U
The 2nd range:0,1,2,3
Others from 0 to F
To Next Page
Loading...
