6
oPErAtIon
3. Leg Angle Adjustment
For stable support when shooting
on uneven terrain, each leg of the
tripod can be individually set at a
preset angle of 24˚, 55˚ or 80˚.
To change the angle of a leg,
press and hold the leg angle
adjustment lock to allow the leg to
move. Shift the leg to one of the 3
preset positions. Release the lock
to secure the leg in the desired
position.
oPErAtIon
2. Leg Length Adjustment
1. Ballhead Operation
A twist-lock design allows you to
quickly change the height of each
telescopic tripod leg. To adjust the
height of a leg, turn the twist-lock
3/4 of a turn counterclockwise
to loosen it, position the leg at
the desired height, and turn the
twist-lock clockwise until the leg
is securely locked in place.
Refer to the included Ballhead
Instruction Manual.
To Next Page
Loading...
Need help?
General
