Oben Travel Series User Manual

7
oPErAtIonoPErAtIon
There are two ways to adjust
the tripod for low-angle shots.
rEVErSE thE cEntEr coLumn
1. Remove the built-in weight
hook from the bottom of
the column by turning
it counterclockwise and
pulling it out of the column.
4. Center Column Adjustment
5. Low-Angle Setup
The sliding center column can
be used to adjust the height of
the camera. Fully extending
the center column after the legs
have been fully extended will
place the camera at the highest
position possible with this
tripod.
Turn the center column twist
lock counterclockwise, adjust
the center column to the
desired height, and lock it in
place by turning the center
column twist lock clockwise.
Ensure that the lock is secure,
but do not over-tighten it to
avoid damaging the tripod.

Oben Travel Series Specifications

General

Brand	Oben
Model	Travel Series
Category	Camera Accessories
Language	English