Trend
For the temperature and humidity values measured by the wireless sensor, the trend
is displayed by an arrow:
Trend rising constant falling
Temperature A > y
Humidity A > Y
How to add extra sensors
The weather thermometer comes with 3 wireless sensors. Additional wireless
sensors are available in our Amazon online shop.
O
^3
__
ft1 f i
__
c£j
\ s n = = = x 7
Sliding switch 1 2 3: Set sensor number
(transmission channel)
Note:
You need to set different channels for the sensor (1-3). You can set it through pull
the stick on near the batteries.
Under the corresponding channel displayed on the base unit, press and hold the CH
button until the signal icon starts to flash to receive the signal from the newly added
sensor.
Where the sensor should be placed
1. Sensor can be hung/placed.
2. Better place it under the porch and eaves.
3. The maximum range of the sensor can reach 500ft in an open area.
4. Make sure that the sensor is vertical so that moisture can be drained correctly.
10
To Next Page
Loading...