Obihai OBi100 - User Manual

OBi Configuration
OBi1 Series – OBi100, OBi110
OBi2 Series – OBi200, OBi202
OBi3 Series – OBi300, OBi302
Configuration:
Start by dialing * * * from the connected phone, then press 1 to confirm your choice, this will return the
IP address of your device being a number similar to 192.168.xxx.xxx.
Once you get the IP address, enter it in the URL address bar "http://" of your Internet Browser to get
access to the Graphic User Interface of the OBi100.

Summary

OBi Device Configuration

Initial Configuration Steps

Dial * * * from the phone and press 1 to obtain the device IP address for browser access.

Authentication Prompt

Accessing the GUI requires username 'admin' and a password.

Service Provider Configuration

ITSP Profile Setup

Configure ITSP Profile A with general settings like name and protocol.

SIP Server Configuration

Proxy and Registrar Settings

Set ProxyServer, ProxyServerPort, RegistrarServer, and RegistrarServerPort.

Voice Services and SIP Credentials

Configuring SP1 Service Details

Enter AuthUserName, AuthPassword, and X_InboundCallRoute for SP1 Service.

Obihai OBi100 Specifications

General

Voice over IP	Yes
Power Supply	5V DC
Weight	0.5 lbs
Protocols	SIP
Codecs	G.711, G.726, G.729
Category	Adapter
Compatibility	Compatible with Google Voice and other VoIP services
Ports	1 FXS port