Obihai OBi300 - User Manual

To Next Page

OBi Configuration

OBi1 Series – OBi100, OBi110

OBi2 Series – OBi200, OBi202

OBi3 Series – OBi300, OBi302

Configuration:

Start by dialing * * * from the connected phone, then press 1 to confirm your choice, this will return the

IP address of your device being a number similar to 192.168.xxx.xxx.

Once you get the IP address, enter it in the URL address bar "http://" of your Internet Browser to get

access to the Graphic User Interface of the OBi100.

Other manuals for Obihai OBi300

Need help?

Do you have a question about the Obihai OBi300 and is the answer not in the manual?

Steps to find the device IP and log into its web interface, including authentication requirements.

Setting the profile name and other general parameters for an Internet Telephony Service Provider (ITSP) profile.

Inputting essential details for the service provider, such as name, URL, and contact number.

Configuring the Proxy Server, Registrar Server, and their respective ports for SIP registration.

Entering the ATA device username, password, and setting up inbound call routing to prevent ghost calls.

Customizing calling features such as Caller ID and call forwarding options.

General