Obihai OBi110 - User Manual

To Next Page

OBi Configuration

OBi1 Series – OBi100, OBi110

OBi2 Series – OBi200, OBi202

OBi3 Series – OBi300, OBi302

Configuration:

Start by dialing * * * from the connected phone, then press 1 to confirm your choice, this will return the

IP address of your device being a number similar to 192.168.xxx.xxx.

Once you get the IP address, enter it in the URL address bar "http://" of your Internet Browser to get

access to the Graphic User Interface of the OBi100.

Other manuals for Obihai OBi110

Need help?

Do you have a question about the Obihai OBi110 and is the answer not in the manual?

Lists the OBi device models: OBi100, OBi110, OBi200, OBi202, OBi300, OBi302.

Steps to initiate configuration by dialing from the phone and accessing the device's IP address.

Setting the general name for the ITSP profile, defaulting to ITSP Profile A.

Entering SIP server and port details for proxy and registrar servers.

Entering the ATA device username and password for VoIP Much service.

Configuring X_InboundCallRoute to prevent unwanted calls from the internet.

Submitting changes to save settings and reboot the OBi device for registration.

General