21
English
Problem Cause Solution
The swing angle
is set or normal
operation starts
after a certain period
when the
swing
button is pressed.
This is not a failure (in
order to confi rm the
positional relationship of
the internal circuit, there
may be cases where
the operation can’t be
performed immediately
or the operation exceeds
the specifi ed angle when
the swing function is
fi rst turned on.).
Please wait for the swing to
resume normal.
The indicator does
not fl ash and the fan
does not work even if
the button is pressed.
On timer is enabled. Press the timer button repeatedly
to disable the timer.
Remote Control not
working.
The battery voltage is
low.
Replace the battery (page 6).
The battery is loaded
incorrectly.
Install the battery properly (page
6).
The remote control is •
installed in the storage
area during operation.
The remote control •
is not pointed at the
receiver.
Too far away from the •
receiver.
Point at the receiver and operate in
effective range (page 6).
Fans not used for a long time should be carefully
inspected
Power cord or AC adapter heats •
up abnormally.
The power turns on and off •
repeatedly.
Burning smell.•
Please turn off the power, unplug
the AC adapter and contact
the dealer or customer service
department of OBJECTO
192001aF3FKLT-251DEng.indd21192001aF3FKLT-251DEng.indd21 2019/04/1010:12:272019/04/1010:12:27
To Next Page
Loading...
Need help?
General
