Using buttons on the Radio
1. Rotate the Volume/Select knob to browse the numbers/symbols/
characters available, press the <Right > key to enter and move to the
next entry.
2. When the last character is entered, press <Volume/Select> to confirm
and it will start associating with your network. Do NOT press the right key
for the last character entry.
3. It will start associating with your network.
After the radio is powered up, follow the steps on the display to Add router,
it will start scanning the routers available and display a list after scanning is
done. Choose your router from the list. If your network is enabled with securi-
ty protection, you will be asked to enter the passcode to connect with your
network.
Follow the steps below to enter the passcode on your radio:
Quick Start Guide
Entering security key of your Router
Rotate to browse characters
Press to confirm
10:10
A A
INPUT: MOVE OK
Enter Password
2/2
Volume/Select Knob
Volume/Select Knob
Press “Right” key
To Next Page
Need help?
Power
Audio
Weight and Dimensions
