OCEAN DRIVE X9 PLUS - How to Operate the E-Scooter; Pre-Ride Checks and Safety Gear; Starting and Maintaining Balance; Speed Modes and Acceleration

 Before using the e-scooter, make sure you have read and
understoodalltheindicationsinthismanual.Possibleinjuries
ordamagesresultingfromincorrectuseofthee-scooterrelieve
themanufacturerandtheretailerfromallliabilityandmakethe
userhimselftheonlyoneresponsibletowardsthecompetent
bodies.
Wear the helmet and other personal protective equipment such as knee
pads, elbow guards and gloves correctly.
It is advised to wear at footwear.
- Before using the e-scooter, ensure that all the components are intact (brakes, wheels,
lights, structure, etc.).
- Hold the grips (21) correctly and raise the kickstand (2).
- Keep the ON/OFF key (23) pressed to switch on the display (14).
- Make sure that the battery is sufciently charged.
- Briey press the key (24) to select the desired level of speed (ECO / D / S).
- Position one foot on the deck and use the other to push yourself forward while maintain
-
ing your balance.
- Simultaneously, press the throttle lever (12); when speed exceeds 4km/h, the motor con
-
nects.
- Position the other foot on the deck and drive carefully and with caution.
- During use it is possible to change speed by pressing or releasing the throttle lever (12) or
modifying the desired speed level.
13. USE OF THE E-SCOOTER
100
EN