OCEAN DRIVE X9 PLUS - E-Scooter Cleaning and Battery Removal; Safe Cleaning Methods; Battery Removal Process

- To clean the e-scooter, use a soft and slightly damp cloth. If cleaning is more difcult than ex-
pected, it is advised to use a toothbrush and to add toothpaste to remove most tenacious dirt.
Remove the toothpaste and residues with a soft and slightly damp cloth.
 DONOTusealcohol,petrolorothersolvents,corrosivechemical
productsinordertoavoiddamagingthee-scooterbothaesthetically
andinitsinternalstructure.
 DONOTusehighpressuregunstocleanthee-scooter.
- When the e-scooter is not used, store it in a dry environment away from humidity.
- Do not store the e-scooter outdoors.
Excessive exposition to sun, heat or cold may damage the e-scooter and accelerate tires and
batteries wear.
16. BATTERY REMOVAL
a• Open the kickstand (2) and position the
e-scooter on a at surface.
b• Undo the screws (19).
c• Raise the deck.
19 19
106
EN