OCEAN DRIVE X9 PLUS - Battery Charging Procedure; Charger Compatibility and First Charge; Step-by-Step Charging Process; Charging Status and System Lock

12. CHARGE OF THE BATTERY
- The e-scooter is equipped with a rechargeable Lithium-ion battery and with a battery charger
suitable for correct charge.
ONLY use the battery charges (XHB-800B-4220) supplied as a standard to
charge the battery.
- Upon rst use, it is advised to charge the battery completely.
- Whenever it is necessary to charge the battery (the residual charge level is indicated by the LEDs
on the display (see paragraph “10”), work as follows:
a• Open the kickstand (2) and position
the e-scooter on a at surface.
b• Remove the cap from the charge sock
-
et of the battery (32).
c• Insert the jack (31) in the charge socket
of the battery (32).
d• Insert the plug (34) of the battery
charger (33) in the power socket.
When the battery charger is
connected to the e-scooter, all
the electric functions and the
motor are disabled to avoid
overheating or damages to the
components.
2
32
31
33
34
98
EN