Ochsner AIR 85 - Assembling the Appliance Casing

28 www.ochsner.com | PIA-982027-AIR 85-in-EN
Appliance installation
»
Lift the front appliance casing panel up and away.
»
Undo and remove the xing screw for the right-hand
appliance casing panel, inside the appliance.
»
Undo and remove the 2 xing screws for the right-
hand appliance casing panel, at the back of the
appliance.
»
Lift the right-hand appliance casing panel up and
away.
9.1.6 Assembling the appliance casing
»
Slide the right-hand appliance casing panel down
from the top along the frame of the appliance, until
the panel clicks into place at the bottom.
»
Install the appliance casing sections in reverse order.
»
For each appliance casing section, ensure that it has
fully clicked into place at all points at the bottom.