Ochsner AIR 85 - Other Symbols; Units of Measurement; Specified Performance Figures

PIA-982027-AIR 85-sh-EN | www.ochsner.com 5
Information on documentation
1.1.3 Keywords
Keyword Meaning
DANGER Failure to observe this information will result in seri-
ous injury or death.
WARNING Failure to observe this information may result in se-
rious injury or death.
CAUTION Failure to observe this information may result in
non-serious or minor injury.
1.2 Other symbols
► This triangular symbol is used as a bullet point.
»
These two arrows represent the symbol for an in-
struction. This shows that there is something you
must do. The actions required are described step by
step.
 These symbols show you the level of a software
menu. In this example, 3 menu levels are
indicated.
Symbol Notes
Must not be disposed of with household waste
Low flammability
Additional documents are available and must be
used
1.3 Units of measurement
Information
In these documents, unless otherwise specied, all
lengths (e.g. in tables and illustrations) are given
in millimetres.
1.4 Specied performance gures
The performance gures of the appliance indicated in
these documents (text, tables and diagrams) have been
calculated according to standardised measurement con-
ditions. However, these measurement conditions often do
not completely correspond to the plant-specic conditions
applicable in the respective user’s system. System-specic
factors that can a󰀨ect the conditions include, for example,
the specic design of the system, the age of the system
and the actual ow rates. For this reason, the stated perfor-
mance gures can di󰀨er from plant-specic performance
data.
The stated performance gures can be conrmed only
if the measurements taken for the appliance are carried
out according to the relevant standardised measurement
conditions.