EasyManua.ls Logo

Octave v70se - Loudspeaker Outputs and Power Connections; Black Box Connection Interface

Octave v70se
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
6. CONNECTIONS – the rear panel
Loudspeaker outputs
Speaker connection terminals.
Red = positive terminal, Black = negative terminal.
The speaker negative terminal is connected to ground.
(Super) Black Box
connection
The (Super) Black Box is an outboard power supply
capacitance upgrade for the power amplifier section (see
chapter 10).
You should switch off the V 70 SE using the power switch
before connecting and disconnecting the Black Box!
AC supply socket
IEC socket with integrated fuse holder.
The fuse is located in a pullout compartment underneath the
socket. You can open the fuse compartment after removing
the plug.
Fuse
For 230/240V: 3.15A slow-blow H (5 x 20 mm).
For 115/240V: 5A slow-blow H (5 x 20 mm).
For 100V: 6.3 A slow-blow H (5 x 20 mm).
Model identification plate
Model and serial number.

Related product manuals