Octave v70se - Getting Started; Unpacking and Contents Check; Removing the Protective Grille

10
3. GETTING STARTED
3.1. Unpack and check the contents of the box.
i
ns
id
e
carton
outer
carton
tube
compartment
owner's manual and
warranty card
power cord
and tools
remote
control
Package contents standard
- V 70 SE serial equipped with 6550 C power tubes
- 5 power tubes packed separately
- Power cord
- Remote control with owner's manual
- 2 screwdrivers: 1 x 2 mm flat-bladed screwdriver for adjusting the BIAS
1 x 2,5 mm Allen key for removing the cover
- Owner's manual with warranty card
3.2. Removing the grille
1) For your own safety, make sure that the amplifier is not connected to power outlet.
2) Completely remove the 4 hexagonal screws using the Allan key supplied. There are 2 screws
on each side.
3) Carefully pull the grille upward to remove.