EasyManua.ls Logo

Octave v70se - Super Black Box Connection and Operation

Octave v70se
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
12. USING THE (SUPER) BLACK BOX
12.2. Super Black Box option
Operation
Blue power LED
The blue "power" LED illuminates when the power amplifier (or integrated amplifier) is
switched on via the amplifier's power on/off switch.
Yellow unload LED
The yellow "unload" LED (discharge control circuit) illuminates for approximately two
seconds after switch-off, and also in case the electronic protection is activated and if the V
70 SE is powered down through Ecomode on. The Super Black Box is equipped with a
rapid discharge circuit, which discharges the unit's electrolytics. The yellow LED indicates
that that this procedure is taking place. The discharge circuit also activates if the SBB
connecting cable is accidentally removed. This is to prevent the SBB maintaining its
charge when it has not been properly disconnected.
Specifications
Dimensions 203 X 159 X 320 mm (W x H x D)
Weight 7.5 kg
Connection cable Length: 80 cm. Longer lengths are available upon request.
Connecting to the amplifier (Please see Black Box option).

Related product manuals