9 Use of the BIOM® 5
14 / 36 Instruction Manual BIOM® 5 (G/55400/1218/en)
Additionally for BIOM
®
5c/cl:
You must insert the drive belt. You can put on a cable duct. The cable
duct is used to keep the connecting cable of the drive unit at the BIOM®
5c/cl away from unsterile parts of the microscope.
Insert the drive belt Fasten the cable duct at the connector plug first
Then push the semi-open duct part over the
cable.
Fig. 9-3: Mounting the drive belt and cable duct