1. Open the side tabs on the main strap. Fasten the tabs to the middle of the strap arms as a
starting point.
2. Open the top tab, loosen the top strap all the way and leave it loose. We'll adjust this
separately in a minute.
3. Angle the On-ear Headphones outward.
4. To put on the headset and test the fit:
a. Hook the tracking triangle on the back of your head.
b. Then pull the headset body down over your face in one smooth motion.
c. If you need to wear glasses with Rift S , you may prefer to put on the headset in a
different way:
i. Hold the headset onto your face with one hand.
ii. Pull the straps down over the back of your head.
iii. You can wear glasses with frames up to 142 mm wide with the Rift S headset. Don't use glasses
that touch the headset lenses, though.
5. Tighten the side tabs slightly.
Keep tightening them until you feel the springs in the strap arms give slightly when you're
putting on the headset.
To Next Page
Loading...
Need help?
General
