Odeca LA715 - System Menu; Device Communication

LA715
9 User ManualP2640300
5.10 ACCESS : Accesses visualization
It shows the last five accesses to he protected programming of the indicator.
6 SYSTEM MENU (SISTEM)
Functioning mode setting ( Prolonged pressure of the key MENU )
Referred to the advanced setting of the parameters that define the kind of operational management that
the device is going to have. (ex.: serial ports, totalization, fiscal memory , ecc.)
6.1 DEVICE
SER-1
PERIF
BAUD
FRAME
NOCOM
SER-2
PERIF
BAUD
FRAME
NOCOM
ADDRES
6.2 USCITE
USC.1
STATO
PESO
STABLE
USC.2
STATO
PESO
STABLE
6.3 TOTAL
AB-TOT
M-TOT
P-MIN
ABIL-P
6.4 LINGUA
6.5 M-FISC
6.6 NPROG
6.7 NO-OFF
6.8 CALTAS
6.1 DEVICE: Serial communication lines programming
In this phase it is possible to program the parameters referred to the two RS232 serial communication
ports and to the USB slot.
The selection is made through the slide keys of the keyboard.
Admitted values :
<SER-1>
<SER-2>
<ADDRES>
6.2.1 - 6.2.2 SER-1/2 N° 1 e 2 RS232 serial port programming
BAUD : Transmission speed
The transmission speed is measured in Baud ( Bit per second )
Admitted values : from 1200 to 115200
( Default : 9600 )