OdorStop OS36 - Troubleshooting Guide; LED Indicator Light Status

Troubleshooting
TheOdorStopUVAirTreatmentSystemisequippedwithLEDindicatorlight(s)thatverifytheunitis
workingproperly.TheOS36has1LEDandtheOS72has2LEDs.
For OS72:theLEDlightclosesttotheon/oswitchindicatesthestatusoftheUVbulbfarthestfromthe
on/oswitch.
Note: TheLEDlight(s)willnotshutowhenthebulb(s)needreplacement.Theywillonlyshutoifthe
bulb breaks or burns out. The OS72 will operate with one properly functioning bulb. For maximum
eectiveness,bothbulbsshouldbeoperatingproperly.
LEDlightsindicatethefollowing:
• IftheLEDlight(s)is/aregreen,theUNITandBULB(s)arefunctioningproperly.
• IfoneorbothLEDlightsareblinking,theUNITisfaultyandmustbereplaced.
• IfoneorbothLEDlightsarenotilluminated,thefollowingarepossiblecauses:
  •Thereisnopowertotheunit-turnonthepowersupplyorplugintheunit.
 •Theon/oswitchisinthe“o”position-placeswitchin“on”position.
 •Thebulb(s)is/arefaulty-replacebulb(s).
 •Thefuseontheunitisfaulty-replacethefuse.
 •TheLEDlighthasfailed-theunitmustbereplaced.
6