52 53
EN EN
Adjust the mechanical brake
Tools: 5mm hex wrench
Before adjusting, make sure the scooter is turned o and not charging.
When the brake is too tight, use the tool to turn the nut on the screw rod
counterclockwise, so as to slightly shorten the brake cable's exposed
bottom part.
When the brake is too loose, use the tool to turn the nut on the screw rod
clockwise, so as to slightly lengthen the brake cable's exposed bottom
part.
Hold the stem with one
hand or both hands to carry.
When unfolding the scooter,
pull the buckle upwards to
release it from the hook,
then lock the folding
mechanism.
Inflate the Tire
Tire:
Check the tire pressure
every month, and inflate the
tires if the pressure is too
low. The recommended tire
pressure is 3.4 bar (50 psi).
To Next Page
Loading...