Diagnostics
Message Type or Code Data Item
2-0 = Flash corrupted
2-
1 = Workstation corrupted
2 = Flash and Workstation corrupted
3 = Workstation new than flash
4 = Flash newer than Workstation
5 = Generator event flash corrupted
6 = ABS flash corrupted
7 = ABS download failed
8 = General Protection Fault (random pointer)
9 = Altered persistent data
10 = Duty Cycle table is missing or corrupt
11 = CMOS and flash is not initialized
12 = CMOS data out of range - Offset #
13 = No error message file
HLF OVERTIME (digital cine) Operation 1-None
2-None
FILAMENT REGULATOR FAILED Error 1-Filament V
2-None
FILAMENT SELECT ERROR – PRESS ANY
KEY
Error 1-Correct filament: 0 = Small; 1 = Large
2-None
FILAMENT STANDBY Operation 1-None
2-None
X-RAY SWITCH SECURITY FAILURE Error 1-X-ray switch register
2-None
X-RAY SWITCH STUCK Error 1-X-ray switch register
2-None
18
Service
Periodic Maintenance
Contents
Schematics
Illustrated Parts
Installation
To Next Page
Loading...
