Replacement
Left Side Cover
Front Leg Cover
The front leg cover does not protect any exposed circuitry and does not block access to any mechanical assemblies. However, it
does protect wiring that runs between the Vertical Column Lift and other C-Arm circuitry. It is unlikely you will ever have to
remove the cover unless it is physically damaged, or you must replace the Front Casters orVertical Column Lift. Follow these
steps to remove the front leg cover:
1. Disconnect Workstation’s AC power plug from AC outlet.
11
Service
Periodic Maintenance
Contents
Schematics
Illustrated Parts
Installation
To Next Page
Loading...
