41
7. Settings
In AUTO mode the pump can adapt to the current heat requirement.
The adaptation to the system occurs gradually. Therefore, you
should allow AUTO mode to days to adapt to a system before
considering a change from AUTO mode to a different mode. If you
change back to AUTO mode, the last settings will be automatically
used. The pumps are equipped with a memory function like this.
8. Night mode
8.1. Conditions and instructions
Pump setting
Heating circuit DescriptionRecommendationOption
A Panel heating AUTO HD, HD
B Radiators AUTO BL
C Radiators BL BL
GB
Recommended and available settings
OEG Heating and solar circulation pumps
Highly efficient. Simple. Good!
To Next Page
