UNPACKING
After unpacking unit, inspect
carefully for any damage that
may have occurred during transit.
Check for loose, missing, or
damaged parts. If any damage
is observed, a shipping damage
claim must be filed with carrier.
Do not use Video Borescope
if broken, bent, cracked or
damaged parts (including labels)
are noted. Any Video Borescope
that appears damaged in any
way, operates abnormally or is
missing parts should be removed
from service immediately. If you
suspect that the Video Borescope
was subjected to a shock load (a
load that was dropped suddenly,
unexpectedly, etc.) immediately
discontinue use until it has been
checked by a factory authorized
service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as guidelines to help you operate your Video Borescope under the
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or
safe handling instructions are not known or not followed. The following safety instructions are to provide the
user with the information necessary for safe use and operation. Please read and retain these instructions for the
continued safe use of your service system. Failure to follow instructions listed below may result in serious injury.
In addition, make certain that anyone that uses the equipment understands and follows these safety instructions
as well.
Operating Instructions and Parts Manual 24385
07/14
2014 ©OEM-TOOLS
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
USB VIDEO BORESCOPE
WARNING
To Next Page
Need help?
General