6
Operating Instructions and Parts Manual 24385
USB VIDEO BORESCOPE
07/14
2014 ©OEM-TOOLS
OPERATING PRECAUTIONS
1. Use the Video Borescope only as directed. Do not operate the Video Borescope unless the user’s manual
has been read thoroughly and proper training has been completed.
2. The Video Borescope is not waterproof. The imager head and cable are waterproof, but not acid-proof or
fireproof. Avoid submerging the imager head and cable into corrosive, oily places and be sure to keep the
imager head and cable away from high temperature objects.
3. Do not use excessive force to insert or withdraw the imager head and cable. This may result in damage to
the Video Borescope or inspection area.
4. Do not use the imager head and cable to move items, clear pathways or clogged areas.
5. Do not eat or smoke while operating the Video Borescope. Use hot, soapy water to wash hands and other
body parts exposed to drain contents after using the Video Borescope to inspect drains and other areas that
may contain chemicals or bacteria, which will help prevent contamination with toxic or infectious material.
6. When the inspection is completed, carefully withdraw the imager head and cable from the inspection area.
7. Maintain the Video Borescope with care. A properly maintained Video Borescope is less likely to cause
injury.
8. Do not drop the Video Borescope. If the Video Borescope is dropped accidently, check for damage and any
other condition that may affect its operation.
9. Dry your hands before operating the Video Borescope or charging the battery.
10. Use appropriate personal protective equipment while handling and using the Video Borescope. Appropriate
personal protective equipment always includes safety glasses and gloves, and may include latex or rubber
gloves, face shields, goggles, protective clothing, respirators and steel toed footwear.
11. Protect against excessive heat. Keep the Video Borescope away from heat sources such as radiators, stoves
or others that produce heat. Do not use the Video Borescope near moving machinery or areas where the
temperature will exceed 113°F.
12. Store the Video Borescope and all cables in a locked area out of the reach of children and people unfamiliar
with Video Borescope.
SETUP INSTRUCTIONS
Installing the Driver on Windows XP or Earlier
On Windows XP® operating system (or earlier), proceed as follows:
1. 1. Connect the camera to a free USB 2.0 port on your pc.
Note: Make sure to use USB 2.0 or higher. Correct operation is not guaranteed with
USB 1.1.
2. Windows automatically recognizes the device and installs the driver. Depending on the settings, Windows
may (not) display the message “Your new hardware is installed and ready for use”. Your camera is now ready
for use.
Installing the Driver on Windows Vista / 7
For Windows Vista / 7, proceed as follows:
1. 1. Connect the camera to a free USB 2.0 port on your pc.
Note: Make sure to use USB 2.0 or higher. Correct operation is not guaranteed with
USB 1.1.
2. Insert the included CD-ROM in your pc.
3. Double-click the setup icon to start installation.
4. Follow the instructions of the installation Wizard.
5. Double-click the Amcap icon on your desktop to run the software. The installation is now complete and your
camera is ready for use.
To Next Page
Loading...