4 5
ITEMS REQUIRED
(not supplied)
• For Standard coupler: 2” hitch ball and ball mount
• For Max Coupler: 2” receiver with ball mount 1” shank hole
• Tow vehicle 7 pin wiring & brake controller
• Trailer license plate & registration
(or trailer transport permit)
• Some vehicles may require a 7-Pin extension
TRAILER SET-UP
• Install License plate
• Prepare tow vehicle hitch
(hitch height = 21”)
• Regular coupler: install 2” hitch ball
• Max Coupler: install supplied yoke on tow vehicle ball mount.
• Attach safety chains
• Secure break away cable
• Plug in 7 pin trailer cable to tow vehicle
• Check trailer lights and brakes for proper operation
NEW TRAILER CHECK LIST
• De-winterize &/or sanitize potable water system
• Charge batteries
• Turn on main circuit breaker
• Check tire pressure
• Fill propane bottle
• Re-torque wheels refer to the maint schedule
• Review maintenance schedule and ensure specic internals
are followed
(i.e. re-torque suspension bolts after 1st week of use)
Refer to the applicable section of this manual for specic
instructions to carry out items in the Quick Setup and New
Trailer Check Lists.
QUICK SET-UP GUIDE
Note: Hitch ball and/or ball mount not supplied with trailer.
To Next Page
Loading...