OHAUS Adventurer ARRV70 User Manual

INSTRUCTION MANUAL
Adventurer
TM
Balances
MANUAL DE INSTRUCCIONES
Balanzas Adventurer
TM
MANUEL D’INSTRUCTIONS
Balances Adventurer
TM
BEDIENUNGSANLEITUNG
Adventurer
TM
Waagen
MANUALE DI ISTRUZIONI
Bilance Adventurer
TM
Mode
O
On
On
Print
Off
On
On

OHAUS Adventurer ARRV70 Specifications

General

Brand	OHAUS
Model	Adventurer ARRV70
Category	Scales
Language	English

Summary

Connecting Power

OPERATION

Turning the Balance ON

Weighing

Basic steps for weighing items, including taring and using the stability indicator.

Taring

How to tare the balance to subtract container weight or previous measurements.

MENU

Activating Units and Parts Counting (PCS)

MENU SETTINGS

Tone Signal and Print Modes

Communication and Print Parameters

Parts Counting

CALIBRATION

Span Calibration

Procedure for performing span calibration using a single weight value.

Linearity Calibration

Steps for performing linearity calibration using multiple weight values.

TROUBLESHOOTING

No Display

Troubleshooting steps for when the balance display shows no output.

Incorrect Weight Reading

Guidance for addressing inaccurate weight measurements, including calibration and rezeroing.

Calibration Procedure Failure

Steps to resolve issues when the calibration procedure does not work correctly.

Unit Display Issues

Menu Selection Saving Error

Error Codes

Stability Error (Err 2.0)

Calibration Error (Err 3.0)

Troubleshooting calibration errors due to incorrect masses or procedures.

Parts Counting Error (Err 6.0)

Over/Under Load Error (Err 8.4)

Troubleshooting over or under load conditions, including recalibration.

SPECIFICATIONS