Need help?Do you have a question about the OHAUS GT 4800 and is the answer not in the manual?
General| Capacity | 4800 g |
|---|---|
| Readability | 0.1 g |
| Interface | RS232 |
| Calibration | External |
| Power Supply | AC Adapter (Included) |
| Units of Measurement | g, oz, lb |
| Operating Temperature | 10°C – 40°C |
| Display | LCD |
Specifies ideal operating conditions, avoiding environmental interference.
Outlines electrical specifications and safety precautions for power connection.
Instructions for performing standard weight measurements on the balance.
Step-by-step guide to use the balance for counting identical parts.
Allows choosing from various weighing units like grams, ounces, etc.
Selects the primary weighing function (e.g., Percent, Parts Counting).
Procedure for calibrating the balance using zero and full span weight values.
Method for calibrating the balance across its weighing range for accuracy.
Configures serial communication settings like baud rate, data bits, parity, and stop bits.
Configures features like Auto Print, Stable Data, Numeric Data, Time, Date, Reference, and Difference.
Lists common problems, their causes, and suggested remedies for balance issues.
Explains various error codes displayed by the balance and their solutions.
To Next Page