Need help?Do you have a question about the OHAUS SP4001 and is the answer not in the manual?
General| Capacity | 4000 g |
|---|---|
| Readability | 0.1 g |
| Linearity | ± 0.2 g |
| Repeatability | 0.1 g |
| Stabilization Time | 2 seconds |
| Calibration | External calibration |
| Display | LCD |
| Interface | RS-232 |
| Auto-Off | Yes |
| Operating Temperature | 10 °C – 40 °C |
| Power Supply | AC Adapter (Included) |
| Platform Size | 180 mm |
| Weighing Units | g, kg, lb, oz |
| Units of Measurement | g, kg, lb, oz |
Declares conformity with EEC directives for electrical equipment and EMC.
Ohaus Corporation's ISO 9001 certification by BVQI.
Important safety measures to follow before operating the balance.
Checking the contents of the Scout Pro package upon delivery.
Procedures for setting up physical parts including lock, platform, bracket, location, and leveling.
Instructions for powering the balance via batteries or AC adapter.
Introduction to the balance's buttons, display, and indicators.
Explains the primary, secondary, and menu functions of the balance buttons.
Explains the meaning of symbols and indicators used on the balance.
Guide to accessing and moving through the balance's menu system.
Steps to access the main balance menus (CAL, SETUP, UNITS, END).
How to confirm or skip menu options.
Procedure to access the Setup menu for configuration options.
Instructions to activate Display Hold or Totalize features.
Steps to save settings and exit the Setup menu.
How to configure the measurement units for the balance.
Overview of the Parts Counting application and its modes.
Procedures for calibrating the balance, including span and linearity.
Procedure for calibrating the balance using two points.
Steps for performing a three-point linearity calibration.
Introduction to the various weighing applications available on the balance.
Basic steps for performing a standard weighing operation.
How to zero out the weight of a container before adding contents.
Detailed steps for performing standard and enhanced parts counting.
How to weigh items as a percentage of a reference weight.
Procedure to set a new reference weight for percentage weighing.
How to stop the percent weighing mode.
How to capture and freeze the highest stable weight reading.
Steps to disable the Display Hold feature.
Instructions for accumulating multiple weight measurements.
How to erase all stored totalized weights.
Overview of extra functionalities like Weigh Below and LFT.
Information on using the balance for weighing below the platform.
How to activate the Legal for Trade mode.
Explanation of the lock switch function for settings and menu access.
Procedure for sealing the balance after official approval.
Guidelines for cleaning and maintaining the balance.
Common issues and their solutions for balance operation.
Explanations and remedies for various error codes displayed by the balance.
Detailed technical specifications and performance data for the balance models.
Information regarding the limited warranty coverage for Ohaus products.
To Next Page
