How to fix poor accuracy on OHAUS Scales?
If you are experiencing poor accuracy with your OHAUS scales, first perform a calibration. If the issue persists, the environment may be unstable. Move the scale to a more suitable location.
What to do if OHAUS Scales cannot turn on?
If your OHAUS scale will not turn on, the cause may be no power to the scale. Verify the connections and voltage.
What to do if OHAUS Scales show UNDER?
If your OHAUS scale displays 'UNDER', it means the pan was removed during weighing. Re-install the pan to resolve this issue.
Why OHAUS Scales cannot calibrate?
If your OHAUS scale will not calibrate, it could be due to an unstable environment or using an incorrect calibration weight. Move the scale to a suitable location and use the correct calibration weight.
Why OHAUS Valor 3000 Scales show Err 8.1?
If your OHAUS scale shows 'Err 8.1', it means the pan had a load on it during power on. Remove the weight from the pan and re-zero the scale.
Why OHAUS Valor 3000 show Err 8.2?
If your OHAUS scale displays 'Err 8.2', it indicates that the pan was removed prior to powering on the device. Install the pan and re-zero the scale.
What to do if OHAUS Valor 3000 Scales show REF Err?
If your OHAUS scale displays 'REF Err', it means the reference weight is too small. Use a larger sample.
What does LOWrEF mean on OHAUS Valor 3000 Scales?
If your OHAUS scale displays 'LOWrEF', it indicates that the reference weight is too low for accurate percent weighing. You can continue to weigh, but the results will be less accurate.
To Next Page
General