Need help?Do you have a question about the OHAUS Valor 2000 and is the answer not in the manual?
General| Capacity | 2000 g |
|---|---|
| Readability | 0.2 g / 0.5 g / 1 g / 2 g / 5 g / 5 g |
| Display | LCD |
| Maximum Capacity | 2000 g |
| Housing Material | ABS Plastic |
| Protection | IP54 |
| Interface | RS232 |
| Power Supply | AC adapter |
| Operating Temperature | 40 °C |
| Calibration | External |
| Operating Humidity | 10% to 85% RH |
Detailed technical specifications for the Valor 2000 scales, including capacity, resolution, and performance.
Basic operation of the scale, including controls, power functions, and menu navigation.
Information on Legal-For-Trade (LFT) mode settings and operation, including access restrictions.
Procedures for testing load cells using resistance and output voltage tests.
Methods for testing the PCB using voltage measurements and simulator testing.
A table listing common symptoms, possible causes, and remedies for troubleshooting.
Step-by-step guide for removing and replacing the main PCB.
Steps for removing and replacing the load cell.
Procedure for adjusting the scale to correct for off-center load errors.
Procedure for setting the scale's span calibration points.
Procedure for calibrating the scale's linearity across multiple points.
Steps to access the service menu for advanced calibration.
Procedure for performing span calibration in the service menu.
Procedure for performing linearity calibration in the service menu.
To Next Page
