Do you have a question about the OHAUS CS 2000 and is the answer not in the manual?
Capacity | 2000 g |
---|---|
Readability | 1 g |
Display | LCD |
Calibration | External |
Power Supply | 3 AA Batteries |
Units of Measure | g, oz, ozt, dwt, ct, gn |
Scale displays all segments for 3 seconds before resetting to zero upon power on.
A star indicator appears in the lower left corner when a stable reading is reached.
Displays lb oz, oz, or g to indicate the selected weight unit.
An 'E' appears if the applied load exceeds capacity; remove load to return to normal.
Allows progressive addition of mass by returning the display to zero.
Removed loads display as negative numbers; press On/Off Zero to cancel.
Displays 'Lo' when batteries are weak and require replacement.
Scale turns off automatically after five minutes of inactivity to save battery.
Turns scale on/off and operates the zero feature. Hold for 3 seconds to turn off.
Changes weighing units (lb oz, oz, g) or initiates calibration by holding.