3
Safety Precautions
This document contains important safety information relating to your Ohme ePod charger. Please
retain this document for future reference.
Please read the document fully before using the Ohme ePod. Not following the safety instructions
can result in electric shock, fire, serious injury or death.
The charger should be inspected periodically to check for damage to the
cabling and the enclosure. Do not use if the product is defective or appears
damaged. Contact the Ohme Helpdesk for advice
Do not attempt to open, repair, tamper or modify the Ohme Charger in any
way. There are no user-serviceable parts
We strongly recommend that a competent person (e.g. qualified electrician)
installs and/or inspects the installation to check for safety and supply
adequacy before use
The overall installation should be in accordance with the IET Wiring
Regulations and the IET Code of Practice for Electric Vehicle Charging
Equipment
Handle the Ohme ePod with care. Do not expose any part of the unit or cable
to severe forces, impact or sharp objects
The Ohme ePod is only intended for vehicles that do not require ventilation
during charging (NB all mainstream electric vehicles do not require
ventilation)
You may clean the Ohme ePod with a soft damp cloth. Do not use solvents or
abrasives
To Next Page
Loading...