ohmex SONARMITE - BTX;SPX version Commands; Memory Operations

SonarMite BTx/SPx v5.02 © 2016 Lymtech
Page 22
BTX/SPX version Commands
☺(^H)elp
Pressing ^H (Contol H) will display the following help information as an aid memoir
to the available commands…
^Help,Format,Version,Id,Save,[Reset,Load,U/Dsos]
Commands shown in parenthesis [ ] are only available in the SYS> format.
Memory Operations
☺ (^R)eset
Pressing ^R (Contol R) will reset the SonarMite to its default values, these values are
saved in Flash memory and set in current working RAM memory (only available in
the SYS> output mode).
☺ (^L)oad
Pressing ^L (Contol L) will reload the Flash memory into the current working
memory. (only available in the SYS> output mode).
☺ (^S)ave
Pressing ^S (Contol S) will save the current working memory area to Flash memory
to become the system settings on reboot.