ohmex SONARMITE - (^I)d; (^U)p; (^D)own; (^C)lear

SonarMite BTx/SPx v5.02 © 2016 Lymtech
Page 26
☺ (^I)d
Toggle the ID number of the instrument. This function is intended for use in multiple
transducer systems running in polled mode.
☺ (^U)p
Increase the sound velocity setting for dense cold water (only available in the SYS>
output mode).
This is a dangerous function and will change calibration values if saved
☺ (^D)own
Decrease the sound velocity setting for lighter fresh/warm water (only available in the
SYS> output mode).
This is a dangerous function and will change calibration values if saved
☺ (^C)lear
Reset output to format 0. (used by external programs).
☺ (^B)
Set output to new format 8. (used by external programs).