ohmex VCL 1508 - Page 54

48
VCL 1508
EN
CLEANING AND MAINTENANCE
Do not use the appliance if the lters are damaged.
Do not use the appliance without the lters (14, 14a and 14b).
Handle the HEPA motor lter carefully in order to avoid damaging it.
Replace it if it’s particularly deteriorated.
Wait for the HEPA motor lter (14a) and the net lter (14) to be completely dry
befor repositioning them.
Do not use the appliance without the lters.
• Remove the net lter (14) from the container (4)
• Clean the lters (14 and 14b) with a soft brush or with water. Also clean the container (4).
• Reposition the lid (4) on the motor body (1) by pressing downwards until you hear the
coupling “click“.
Wait for the lters (14 and 14b) and container (6) to be completely dry before
re-assembling them.
Make sure that the container is correctly hooked.
“Air outlet lter” cleaning (15)
The ensure the appliance optimal functioning, clean the air outlet lter
(15) frequently .
How to work:
• Electrically disconnect the appliance.
• Remove the air outlet grid (7).
• Remove the air outlet lter.
• Remove the dirt.
- Do not use the appliance without the air outlet lter.
• If the lter is particularly dirty or ruined proceed with its replacement.