47
VCL 1508
EN
CLEANING AND MAINTENANCE
• For the appliance external parts cleaning use a damp cloth avoiding using abrasive
detergents.
Never immerse the motor body (1) in water or other liquids.
Never wash the motor body (1) using a water jet.
• The appliance aspiration capacity depends on the air ltering systems conditions too.
Container (4) cleaning
• Do not ll the container (4) beyond the indicated MAX level. (Fig. F15)
• Press the button (8) and remove the container (4). (Fig. F16)
• Place yourself on a rubbish collector.
• Press the lever (25) to open the cover (4b). Empty the container (6). (Fig.F17)
• Correctly close the container (4).
Cleaning the lters
• Press the lever (6a) to open the lid (C). (Fig.F18)
• Remove the HEPA lter (14a) and the round lter (14b). (Fig.F19)
• Clean both lters by beating them in a waste container (basket, etc.).
If it’s necessary, blow them with air paying attention not to damage them.
• If it’s necessary, clean the round lter (14b) with water and mild soap; rinse it abundantly
with water.
Wait for the lter to be completely dry before
placing it on the container (4) again.
To let it dry for at least 24 hours is advised.
Do not wash the HEPA lter (14a). If it’s tired, replace it.
ALWAYS disconnect the power
plug from the socket before
performing maintenance and/
or cleaning operations
.
To Next Page
Loading...