Need help?Do you have a question about the Ohmic instruments UPM-DT-1 and is the answer not in the manual?
General| Accuracy | ±1% of reading ±2 digits |
|---|---|
| Resolution | 0.1Ω |
| Display | LCD |
| Operating Temperature | 0°C to 40°C |
| Power Supply | 9V battery |
| Test Current | 1mA |
Details on how to unpack the power meter and its accessories from the carrying case.
Identifies and explains the function of each button and display element on the instrument's panel.
Explains the meaning of various indicators and symbols displayed on the unit, including custom units.
Instructions for safely packing and transporting the UPM-DT power meter.
Provides key information on line power, measurement ranges, and re-zeroing procedures for accurate measurements.
Explains how to configure print settings, including auto print, interval, stability, and data formats.
Details the RS-232 connection pinout and requirements for communicating with computers or printers.
Lists and explains the ASCII commands used to control the balance and retrieve data via the RS-232 interface.
Provides guidance on verifying scale function, understanding range warnings, and troubleshooting display issues.
Explains the importance of de-gassed water and methods to obtain or maintain it for accurate measurements.
Discusses maximum limits for therapy power and exposure levels for physical therapy applicators.
Details procedures and calculations for certifying pulsed mode operation, including amplitude modulation.
Provides instructions on how to properly ship instruments to the manufacturer for repair or adjustment services.
Advises on inspecting shipments for damage and filing claims with the carrier.
To Next Page