p. 31
Add On Module
Each master module is capable of controlling 8 heating zones, each of which may use one or more
loops of piping, with one or more thermal actuators. These zones are referred to as channels 1 to
8. If you wish to control more than 8 zones, it is necessary to install an ADD ON (AO)
modules, each of which can provide another 6 outputs.
The first AO module then controls channels 9 to 14,
Connection of master and add on module
Connect the AO-module, using the special cable included in the box.
Mains supply from 230V fused isolator
INSTRUCTIONS
Add ON module
Configuring the Total System
To Next Page
Loading...
